Certified, eco-friendly mineral geo-mortar with a crystalline reaction geo-binder base, for passivation, restoration, finishing and monolithic protection of deteriorated concrete structures, ideal for use in GreenBuilding. Very low petrochemical polymer content, free from organic fibres. Thixotropic, normal setting.

GeoLite® is a thixotropic geo-mortar used to passivate, restore, finish and protect reinforced concrete structures such as beams, pillars, slabs, front sections, ramps, facades, decorative elements, cornices and civil engineering structures such as bridges, viaducts, tunnels and water channels. Suitable as an inorganic mineral matrix in composite reinforcement systems in the GeoSteel line.

More Info

Certified, eco-friendly mineral geo-mortar with a crystalline reaction geo-binder base, for passivation, restoration, finishing and monolithic protection of deteriorated concrete structures, ideal for use in GreenBuilding. Very low petrochemical polymer content, free from organic fibres. Thixotropic, semi-rapid setting 40 min.

GeoLite® 40 is a thixotropic geo-mortar used to passivate, restore, finish and protect reinforced concrete structures such as beams, pillars, slabs, front sections, ramps, facades, decorative elements, cornices. Specific for operations involving mobile platforms, low temperatures and where the result must be ready for use quickly. Paintable after 4 hour.

More Info

Certified, eco-friendly mineral geo-mortar with a crystalline reaction geo-binder base, for passivation, restoration, finishing and monolithic protection of deteriorated concrete structures, ideal for use in GreenBuilding. Very low petrochemical polymer content, free from organic fibres. Thixotropic, rapid setting 10 min.

GeoLite® 10 is a thixotropic geo-mortar used to passivate, restore, finish and protect reinforced concrete structures such as beams, pillars, slabs, front sections, ramps, facades, decorative elements, cornices. Specific for operations involving mobile platforms, low temperatures and where the result must be ready for use quickly. Paintable after 4 hour.

More Info

Certified, eco-friendly mineral geo-paint with a geo-active, silicate micro particle base, to regenerate and protect concrete surfaces by crystallisation, ideal for use in GreenBuilding.

GeoLite® MicroSilicato is an opaque, “mottled” effect filling geo-paint for the monolithic protection of new or restored concrete. It is anti-carbonation, resistant to atmospheric agents, algae and mould and can be applied by roller or brush to reinforced concrete structures such as beams, pillars, front sections, facades, decorative elements, cornices and civil engineering structures such as bridges, viaducts and tunnels.

More Info

Certified, eco-friendly, water-based preparation coat for mineral-based absorbent surfaces, ideal for use in GreenBuilding. Single-component, solvent-free and with very low volatile organic compound emissions. Safeguards the health of both operators and the environment.

GeoLite® Base is specifically intended for the preparation of substrates in the realisation of high-thickness patching on concrete slabs, flooring and structural elements. It regulates water absorption in the substrate and allows a natural and correct crystallisation and solid adhesion of the geo-mortar to the substrate.

More Info

Certified, eco-friendly mineral geo-mortar with a crystalline reaction geo-binder base, for passivation, repair and monolithic consolidation of deteriorated concrete structures, ideal for use in GreenBuilding. Very low petrochemical polymer content, free from organic fibres. Pourable, normal setting.

GeoLite® Magma is a pourable geo-mortar used to passivate, restore and consolidate reinforced concrete structures such as beams, pillars, slabs, flooring, pavements and civil engineering structures such as bridges, viaducts and to anchor and fix metal elements.

More Info

Certified, eco-friendly mineral geo-mortar with a crystalline reaction geo-binder base, for passivation, repair and monolithic consolidation of deteriorated concrete structures, ideal for use in GreenBuilding. Very low petrochemical polymer content, free from organic fibres. Rapid setting 20 min. Grey version is pourable. Black version has variable rheology (thixo – pourable).

GeoLite® Magma 20 is a geo-mortar for passivation, repair and consolidation of reinforced concrete structures and civil engineering structures that must be ready for use quickly, such as industrial and airport flooring, joints in motorway decking, pavements and to anchor and fix traps and drains, manholes, fences, sign posts, safety barriers.

More Info

Eco-friendly, epoxy mineral adhesive, with high wettability for the impregnation of GeoSteel textiles, ideal for GreenBuilding. Solvent-free and with very low volatile organic compound emissions, safeguards the health of operators.

GeoLite® Gel is a two-component, epoxy thixotropic gel system, complying with the performance requirements of EN 1504-4 standard for bonding structural parts and with the guidelines of CNR–DT 200 R1/2013, for moist impregnation and glueing of structural reinforcement systems.

More Info

Certified, eco-friendly mineral geo-mortar with a crystalline reaction geo-binder base, in black, specific for road applications. Ideal for use in GreenBuilding. Very low petrochemical polymer content, free from organic fibres. Thixotropic rapid setting 20 min

GeoLite® Asfalto is a geo-mortar ideal for those applications that must be ready for use quickly, such as industrial and airport flooring, pavements and to anchor and fix traps and drains, manholes, fences, sign posts, safety barriers.

More Info

FLUECO 40 T is a single component, nano-polymeric, fibre-reinforced, cementitious mortar that is mixed with water to obtain non-segregatable, shrinkage-compensating thixotropic mixes. FLUECO 40 T develops high initial and final mechanical strength and is waterproof. It is longlasting even in aggressive environments and ensures strong bonding. It contains no metal parts or chlorides. FLUECO 40 T is resistant to chemical and environmental attack and is suitable for all the classes of exposure envisaged by UNI 11104.

More Info

FLUECO 55 T is a single component fibre-reinforced cement-based mortar with synthetic micro- fibres that is combined with water to obtain a thixotropic shrinkage-compensated mix. FLUECO 55 T develops high initial and final mechanical strength and is waterproof. It is longlasting even in aggressive environments and ensures strong bonding. It contains no metal parts or chlorides.

More Info

FLUECO 80 T is a single-component, fibre-reinforced cementitious mortar that is mixed with water to obtain shrinkage-compensating thixotropic mixes. FLUECO 80 T develops high initial and final mechanical strength and is waterproof. It is longlasting even in highly aggressive environments and ensures strong bonding. It contains no metal parts or chlorides. FLUECO 80 T is resistant to chemical and environmental attack and is suitable for all the classes of exposure envisaged by UNI 11104.

More Info

DRACOSTEEL is a two-component protective, passivating mortar applied with a brush to protect reinforcement bars. It contains water-dispersed polymers, cementitious binders and corrosion inhibitors. DRACOSTEEL is applied to the reinforcement bars of reinforced concrete specifically to protect from corrosion.

More Info

CONCRETE FINISHER is a ready-mixed cement mortar based on specific fine-grained aggregates, synthetic polymers and special admixtures. It should be mixed with water. CONCRETE FINISHER is very thick and exhibits superior resistance to frost and thaw as well as chemically aggressive agents. Due to its superior adhesion and low permeability to carbon dioxide and water, CONCRETE FINISHER is particularly recommended for protective skim coatings on concrete structures and finish coat with FLUECO mortars.

More Info

FLUECO 75 is a pre-blended cementitious mortar for anchoring structural elements and machinery that may be subject to vibration, rotation and thermal stress. Simply mix FLUECO 75 with water to form a fluid, non-segregatable mix that ensures high adhesion to rebars and durability.

More Info

FLUECO 35 is a pre-mixed, expansive fluid coarse-grain cementitious mortar for anchoring of structures and machinery that may be subject to vibration and / or thermal stress. Simply mix FLUECO 35 with water to form a fluid, non-segregatable, bleed-free mix. This grout adheres exceptionally well to rebars and is longlasting. Its extended workability time (60 minutes at 20 ° C) facilitates installment and it is totally waterproof to guarantee no infiltration of water, oil or steam that may contain sulphates, sulphides and chlorides.

More Info

FLUECO 77 CABLE is an injection grout with no plastic or hygrometric shrinkage. It is used to fill sheaths that contain post-tensioned braided cables, to secure bars and tie rods exposed to increased tensile stress and to seal cracks and cavities in concrete, masonry, rock, and stone structures, etc.

More Info

EPOX INIEZIONE R.M.2 is a two-component, solvent-free structural epoxy adhesive with low viscosity. It can be used for structural reinforcement building materials even if they show low porosity, such as concrete, masonry, sandstone and stone aggregates. Its fluidity and adhesion to both standard and moist support surfaces also make it ideal for repairing concrete surfaces and structures via pouring.

More Info

EPOX RIPRESA is a two-component structural adhesive based on epoxy resins in aqueous phase. It is suitable for creating construction joints between fresh and cured concrete as well as bonding and monolithic repairs by casting. EPOX RIPRESA provides structural bonding even where there is damp.

More Info

EP.FIX is a structural epoxy plaster for bonding precast non load-bearing and load-bearing concrete elements, monolithic repairs of cracks and section rebuilding. EP.FIX is also for structural reinforcement (beton plaque as bonding agent between different types of material).

More Info

EPOBETON is a solvent-free, self-levelling epoxy mortar that is ready for use and contains pre- measured components: base, catalyst and in the three-component version, filler. The different versions of EPOBETON can be widely used in the repair of flooring, joints and precision anchoring in general. EPOBETON is easy to apply applied simply by pouring or by injection. The product complies with the Legislative Decree No. 26/05/97 155 on the hygiene of foodstuffs.

More Info

This is a wide-ranging line of innovative products and advanced technology for reinforcing structures with fabric, tapes, bars and carbon fibre FRP composite materials. Our systems can be used for seismic retrofitting, consolidating and restoring the loadbearing capacity of buildings with non-invasive techniques that can protect materials and original architectures. Your buildings can be considered as safe, stable and solid in compliance with current regulations

More Info

This is a wide range of decorative and protective coatings and resins for concrete and industrial buildings. Resins, paints, protective waterproofers and chemical-resistant products for concrete surfaces and floors.

More Info

This is a professional range of primers and bond coats specifically formulated for reinforcing surfaces and impregnating concrete surfaces and even dusty ones. After selecting the appropriate primer, resin coatings are so easy to apply that they can reinforce your surface, promote adhesion and avoid any problems due to wet surfaces.

More Info

This is a comprehensive range of products that are suitable for maintaining and restoring industrial floors. Those resins and products based on cement resins are suitable for sealing cracks, rigid joints and sills as well as grouting machinery. This range also includes the most advanced products based on resins and cement resins for refurbishing and reinforcing old floors, producing coating protective and reinforcement layers, even on wet surfaces, and restoring the features of old floors made of concrete, tiles and resin.

More Info